P–T–t–d evolution of orogenic middle crust of the Roc de Frausa Massif (Eastern Pyrenees): a result of horizontal crustal flow and Carboniferous doming?          下载免费PDF全文

C. Aguilar  M. Liesa  P. Štípská  K. Schulmann  J. A. Muñoz  J. M. Casas 《Journal of Metamorphic Geology》2015,33(3):273-294

Structural, petrological and textural studies are combined with phase equilibria modelling of metapelites from different structural levels of the Roc de Frausa Massif in the Eastern Pyrenees. The pre‐Variscan lithological succession is divided into the Upper, Intermediate and Lower series by two orthogneiss sheets and intruded by Variscan igneous rocks. Structural analysis reveals two phases of Variscan deformation. D1 is marked by tight to isoclinal small‐scale folds and an associated flat‐lying foliation (S1) that affects the whole crustal section. D2 structures are characterized by tight upright folds facing to the NW with steep NE–SW axial planes. D2 heterogeneously reworks the D1 fabrics, leading to an almost complete transposition into a sub‐vertical foliation (S2) in the high‐grade metamorphic domain. All structures are affected by late open to tight, steeply inclined south‐verging NW–SE folds (F3) compatible with steep greenschist facies dextral shear zones of probable Alpine age. In the micaschists of the Upper series, andalusite and sillimanite grew during the formation of the S1 foliation indicating heating from 580 to 640 °C associated with an increase in pressure. Subsequent static growth of cordierite points to post‐D1 decompression. In the Intermediate series, a sillimanite–biotite–muscovite‐bearing assemblage that is parallel to the S1 fabric is statically overgrown by cordierite and K‐feldspar. This sequence points to ~1 kbar of post‐D1 decompression at 630–650 °C. The Intermediate series is intruded by a gabbro–diorite stock that has an aureole marked by widespread migmatization. In the aureole, the migmatitic S1 foliation is defined by the assemblage biotite–sillimanite–K‐feldspar–garnet. The microstructural relationships and garnet zoning are compatible with the D1 pressure peak at ~7.5 kbar and ~750 °C. Late‐ to post‐S2 cordierite growth implies that F2 folds and the associated S2 axial planar leucosomes developed during nearly isothermal decompression to <5 kbar. The Lower series migmatites form a composite S1–S2 fabric; the garnet‐bearing assemblage suggests peak P–T conditions of >5 kbar at suprasolidus conditions. Almost complete consumption of garnet and late cordierite growth points to post‐D2 equilibration at <4 kbar and <750 °C. The early metamorphic history associated with the S1 fabric is interpreted as a result of horizontal middle crustal flow associated with progressive heating and possible burial. The upright F2 folding and S2 foliation are associated with a pressure decrease coeval with the intrusion of mafic magma at mid‐crustal levels. The D2 tectono‐metamorphic evolution may be explained by a crustal‐scale doming associated with emplacement of mafic magmas into the core of the dome.  相似文献   

Experimental study of deformable connection consisting of buckling‐restrained brace and rubber bearings to connect floor system to lateral force resisting system          下载免费PDF全文

Georgios Tsampras  Richard Sause  Robert B. Fleischman  Jose I. Restrepo 《地震工程与结构动力学》2017,46(8):1287-1305

This paper presents experimental and numerical studies of a full‐scale deformable connection used to connect the floor system of the flexible gravity load resisting system to the stiff lateral force resisting system (LFRS) of an earthquake‐resistant building. The purpose of the deformable connection is to limit the earthquake‐induced horizontal inertia force transferred from the floor system to the LFRS and, thereby, to reduce the horizontal floor accelerations and the forces in the LFRS. The deformable connection that was studied consists of a buckling‐restrained brace (BRB) and steel‐reinforced laminated low‐damping rubber bearings (RB). The test results show that the force–deformation responses of the connection are stable, and the dynamic force responses are larger than the quasi‐static force responses. The BRB+RB force–deformation response depends mainly on the BRB response. A detailed discussion of the BRB experimental force–deformation response is presented. The experimental results show that the maximum plastic deformation range controls the isotropic hardening of the BRB. The hardened BRB force–deformation responses are used to calculate the overstrength adjustment factors. Details and limitations of a validated, accurate model for the connection force–deformation response are presented. Numerical simulation results for a 12‐story reinforced concrete wall building with deformable connections show the effects of including the RB in the deformable connection and the effect of modeling the BRB isotropic hardening on the building seismic response. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

Variation in reach‐scale thalweg‐migration intensity in a braided reach of the lower Yellow River in 1986–2015          下载免费PDF全文

Jie Li  Junqiang Xia  Meirong Zhou  Shanshan Deng  Xiaolei Zhang 《地球表面变化过程与地形》2017,42(13):1952-1962

Thalweg migration of an alluvial river plays a key role in channel evolution, which may influence the effect of existing river training works and biodiversity on floodplains, and cause losses in riparian land and property. The braided reach of the Lower Yellow River underwent continuous channel aggradation during the period from 1986 to 1999, and then remarkable channel degradation in 1999–2015 owing to the state of operation of the Xiaolangdi Reservoir in 1999. Here we quantify associated thalweg migration changes and identify the key influencing factor in the braided reach. Thalweg‐migration distances and intensities at section‐ and reach‐scales were calculated during the past 30 years from 1986 to 2015, in order to investigate the characteristics of thalweg migration in the reach. There was a 47% reduction in the reach‐scale thalweg‐migration distance and a 35% reduction in the corresponding migration intensity after the reservoir operation. It is also revealed that fluvial erosion intensity is a dominant factor in controlling the thalweg migration, based on the investigation into various influencing factors in the study reach. The thalweg‐migration intensity of the braided reach can be expressed as a power function of the previous four‐year average fluvial erosion intensity. The calculated thalweg‐migration intensities in 1986–2015 using the proposed relation generally agree with the observed data. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

Multi‐Scale Fuzzy Inference System for Influent Characteristic Prediction of Wastewater Treatment          下载免费PDF全文

Zhiwei Cheng  Xuejiao Li  Yun Bai  Chuan Li 《洁净——土壤、空气、水》2018,46(7)

  相似文献   

内蒙古东部地区2次地震震级标度大小的分析与探讨     

丁风和  哈媛媛 《高原地震》2011,23(1):4-7

从表征地震断层错动引起的地震强度的一个力学量(地震矩)出发,依据不同断层性质地震的地震矩与震级的统计关系,反演得到2003年8月16日巴林左旗-阿鲁科尔沁旗地震和2004年3月24日东乌珠穆沁旗地震的震级、断层面积、平均错距、破裂长度以及释放能量等震源参数.在利用不同机构提供的地震矩得到这2次地震面波震级的过程中发现,...  相似文献   

Managing expert-information uncertainties for assessing collapse susceptibility of abandoned underground structures     

Aude Nachbaur  Jérémy Rohmer 《Engineering Geology》2011,(3):166

Assessing the collapse susceptibility of abandoned cavities at a regional scale is associated with large uncertainties that are mainly related to the very nature of the phenomena, but also to the difficulty in collecting exhaustive information at such a scale on often “forgotten” structures. In this context, the expert's role is essential, because he is able to synthesize the information resulting from the inventory and from the commonly imprecise, if not vague, criteria on the basis of his experience and his knowledge of the geological, historical, economic regional context.In this article, we propose mathematical tools for representing and processing this information in order to give flexibility to this step and manage the uncertainty inherent in the expert's information. The first tool, based on the weight of evidence theory, is for managing the uncertainty due to the heterogeneous spatial distribution of the data, whereas the second tool, based on the fuzzy set theory, is for managing the imprecision and incompleteness of available data, which hinder the definition of the class boundaries of the quantitative decision criteria. Based on an appropriate representation of the uncertainty sources (related to the input data and to the expert diagnostic), we then propose a methodology that integrates the uncertainty in the final output of the collapse susceptibility assessment and provides a confidence indicator useful within the decision-making process. The proposed methodology is applied to the Arras territory in the North of France, where abandoned chalk pits (dating back to the Roman ages) and war saps located in the vicinity of the First World War front lines (i.e. covered trenches), raise both difficulties for urban planning.  相似文献   

最近11万年来东亚季风轨道与千年尺度气候变率在南京下蜀黄土中的记录     

张茂恒  孟景闻  夏应菲  赖忠平  汪永进 《地层学杂志》2011,(3):321-327

对南京李家岗下蜀黄土剖面上部的近20 m地层进行野外观察和室内研究,划分出5层黄土和5层古土壤,按5 cm间距采集了Rb/Sr、色度、磁化率和粒度样品,并在剖面和可追索的相邻剖面上采集了13个光释光测年样品。分析结果显示,Rb/Sr、色度和磁化率等夏季风代用指标曲线所表现的4次岁差变率振荡具有高度的一致性,依据气候地层...  相似文献   

裂隙岩体变形模量尺寸效应研究Ⅱ:解析法   总被引：1，自引：1，他引：0  

杨建平  陈卫忠  戴永浩 《岩土力学》2011,32(6):1607-1612

通过分开考虑岩块和裂隙对岩体变形的贡献,研究了任意裂隙分布岩体等效变形模量的解析计算方法,并用正交裂隙岩体对该方法进行了验证,得到的结果和经典解析解完全一致。此外,通过该方法对锦屏Ⅱ级电站辅助洞中段随机裂隙岩体进行不同尺寸、不同方位下等效变形模量的计算,计算结果显示,随着岩体尺寸的增大,不同方位的变形模量值趋于稳定,该裂隙岩体变形模量的特征单元对(REV)尺寸为8 m,和有限元计算结果一致。结果表明该方法可以用来研究裂隙岩体等效变形模量尺寸效应和各向异性特性,研究成果对于裂隙岩体等效变形参数取值具有重要意义。  相似文献   

缝洞型油藏超大规模酸压技术     

杨敏  张烨 《地质科技情报》2011,30(3):89-92

塔河油田缝洞型油藏主要的储集体空间类型为溶蚀的裂缝及大型的溶洞,连通关系极其复杂,70％的钻井需要酸压才能投产.为进一步沟通远井地带的缝洞储集体,室内模拟及现场监测结果表明,超大规模酸压技术能够提高造缝长度,沟通井眼远处的储集体.通过多口井的研究及现场试验,在油气富集带上具有明显的地震反射异常,生产过程中供液不足的井进...  相似文献   

华县地区地热水形成环境及热储温度探讨     

林平选  张娟 《陕西地质》2011,29(1):77-82

本文根据华县地热井水质分析结果,在水溶组分平衡分布计算的基础上进行了水—岩平衡分析,确定了地热水中的平衡矿物和平衡温度范围,应用SiO2温标估算了热储的温度,并根据这些温标的原理和华县地热水的实际情况,讨论了地热水形成的环境以及化学温标适用性和估算结果的可靠性。  相似文献